Viewing Logged-In User Information; Configuring Web Session And Access Settings - AudioCodes Mediant 800 User Manual

CHAPTER 6 Web-Based Management
Once enabled, each time you login to the device, the Login Information window is displayed, as
shown in the example below:
To close the window, click Close.

Viewing Logged-In User Information

The username of the currently logged in user is displayed in the top-right corner of the Web
interface. If you click the username (e.g., "Admin"), a drop-down box appears, for example:
The following information is displayed:
■ Username (e.g., Admin) of currently logged-in user
■ User level (e.g., Security Administrator) of currently logged-in user
■ Duration of the current Web session (starting from login)
The following buttons are also displayed:
■ Log Out: Logs you out of the Web session (see
■ Change Password: Allows you to change your login password (see
Password by All User Levels

Configuring Web Session and Access Settings

The following procedure describes how to configure security features related to Web user sessions
and access.
Mediant 800 Gateway & E-SBC | User's Manual
Logging Off the Web
on the next page)
- 51 -
Interface)
Changing Login