AudioCodes Mediant 800 User Manual page 234

Gateways & session border controllers
Hide thumbs Also See for Mediant 800:
Table of Contents

Advertisement

CHAPTER 16    Services
3.
Configure a DHCP server according to the parameters described in the table below.
4.
Click Apply.
Table 16-2: DHCP Servers Table Parameter Descriptions
Parameter
General
'Index'
dhcp server
<index>
'Interface Name'
network-if
[DhcpServer_
InterfaceName]
'Start IP Address'
start-address
[DhcpServer_
StartIPAddress]
'End IP Address'
end-address
[DhcpServer_
EndIPAddress]
'Subnet Mask'
subnet-mask
[DhcpServer_
SubnetMask]
'Lease Time'
lease-time
[DhcpServer_
LeaseTime]
DNS
'DNS Server 1'
dns-server-1
[DhcpServer_
DNSServer1]
Defines an index number for the new table row.
Note:
Each row must be configured with a unique index.
Currently, only one index row can be configured.
Associates an IP network interface on which the DHCP server
operates. The IP interfaces are configured in the IP Interfaces table
(see
Configuring IP Network
By default, no value is defined.
Defines the starting IP address (IPv4 address in dotted-decimal
format) of the IP address pool range used by the DHCP server to
allocate addresses.
The default value is 192.168.0.100.
Note: The IP address must belong to the same subnet as the
associated interface's IP address.
Defines the ending IP address (IPv4 address in dotted-decimal
format) of the IP address pool range used by the DHCP server to
allocate addresses.
The default value is 192.168.0.149.
Note: The IP address must belong to the same subnet as the
associated interface's IP address and must be "greater or equal" to
the starting IP address defined in 'Start IP Address'.
Defines the subnet mask (for IPv4 addresses) for the DHCP client.
The value is sent in DHCP Option 1 (Subnet Mask).
The default value is 0.0.0.0.
Note: The value must be "narrower" or equal to the subnet mask of
the associated interface's IP address. If set to "0.0.0.0", the subnet
mask of the associated interface is used.
Defines the duration (in minutes) of the lease time to a DHCP client
for using an assigned IP address. The client needs to request a new
address before this time expires. The value is sent in DHCP Option
51 (IP Address Lease Time).
The valid value range is 0 to 214,7483,647. The default is 1440.
When set to 0, the lease time is infinite.
Defines the IP address (IPv4) of the primary DNS server that the
DHCP server assigns to the DHCP client. The value is sent in
DHCP Option 6 (Domain Name Server).
The default value is 0.0.0.0.
- 194 -
Mediant 800 Gateway & E-SBC | User's Manual
Description
Interfaces).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-sbc

Table of Contents