Rear Panel - R&S NGL200 Getting Started

®
R&S NGL200/NGM200
USB connector (6)
The USB connector is a Type-A connector. You can connect a USB flash drive to
this connector to perform a firmware update, store logging data or screen shots.
Menu control keys (7)
The menu control keys allow you to access the home window, device/channel
menu window and user key in the instrument.
For a detailed description on menu control keys, see section "Menu Controls" in
the User Manual.
6.1.2

Rear panel

Figure 6-2 shows the rear panel of the R&S NGL/NGM with its connectors.
16 15
Figure 6-2: Rear panel of R&S NGL/NGM with 2 channels
8 = Optional IEEE-488 (GPIB) interface
9 = Digital I/O connector
10 = Ground terminal
11 = AC inlet with fuse holder and voltage selector
12 = Channel 1 rear panel connector for R&S NGL202, R&S NGM202 models. The two D.n.c.
labels for NGM201 are labeled as DVM+ and DVM-
13 = Channel 2 rear panel connector for R&S NGL202, R&S NGM202 models. The two D.n.c.
labels for NGM202 are labeled as DVM+ and DVM-
14 = USB connector (device)
15 = USB connector (host)
16 = Ethernet (LAN) connector
Getting Started 1178.8720.02 ─ 07
8 9 10
14 13
Instrument tour
Overview of controls
11
12
21