asieps_tobira_IM_US.book 65 ページ 2012年1月17日 火曜日 午後3時48分
27.Fuel Level Sensor
A: REMOVAL
WARNING:
Place "NO OPEN FLAMES" signs near the
working area.
CAUTION:
Be careful not to spill fuel.
NOTE:
The fuel level sensor is built in fuel pump assembly.
1) Remove the fuel pump assembly. <Ref. to
FU(H4DOTC)-63, REMOVAL, Fuel Pump.>
2) Disconnect the connector from fuel pump brack-
et.
3) Remove the fuel temperature sensor.
4) Remove the bolts which attach the fuel level
sensor onto the mounting bracket.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
1.4 N·m (0.14 kgf-m, 1.03 ft-lb)
Fuel Level Sensor
FU-01065
FU-01068
FU-01066
FU(H4DOTC)-65
FUEL INJECTION (FUEL SYSTEMS)