asieps_tobira_IM_US.book 71 ページ 2012年1月17日 火曜日 午後3時48分
6) In the engine compartment, disconnect the fuel
delivery hose, return hose and evaporation hose.
(1) Disconnect the quick connector on the fuel
delivery line and return line by pushing the ST in
the direction of the arrow.
ST 42099AE000 CONNECTOR REMOVER
(2) Remove the clip, and disconnect the evapo-
ration hose from the pipe.
CAUTION:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
ST
(B)
(A) Fuel delivery hose
(B) Return hose
(C) Evaporation hose
7) Lift up the vehicle.
8) Disconnect the quick connector on the fuel line.
(1) Clean the pipe and connector, if they are
covered with dust.
(2) To prevent from damaging or entering for-
eign matter, wrap the pipes and connectors with
plastic bag etc.
(3) Hold the connector (A) and push the retainer
(B) down.
Fuel Delivery, Return and Evaporation Lines
(A)
(C)
FU-02752
FU-01333
FU(H4DOTC)-71
FUEL INJECTION (FUEL SYSTEMS)
(4) Pull out the connector (A) from the retainer
(B).
( A )
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector on fuel line.
CAUTION:
Make sure there is no damage or dust on the
connections. If necessary, clean seal surface of
pipe.
NOTE:
Use a new retainer.
(A) Seal surface
(B) Pipe
( B )
( C )
FU-00124
( A )
( B )
FU-00125