Subaru IMPREZA GD 2007 Series Manual page 1711

asieps_tobira_IM_US.book 12 ページ ２０１２年１月１７日 火曜日 午後３時４８分
EXHAUST
5) Connect the connector to rear oxygen sensor.
6) Secure clip on the crossmember.
7) Tighten the bolt which holds center exhaust pipe
bracket to transmission.
Tightening torque:
30 N·m (3.1 kgf-m, 22.4 ft-lb)
8) Tighten the bolt which holds center exhaust pipe
to hanger bracket.
Tightening torque:
35 N·m (3.6 kgf-m, 26 ft-lb)
9) Lower the vehicle.
Center Exhaust Pipe
10) Position the turbocharger lower cover, and
tighten the bolts which hold the lower cover and
center exhaust pipe.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
EX-00139
11) Position the turbocharger upper cover, and
tighten the bolts which install the upper side of up-
per cover.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
FU-00082
12) Lift up the vehicle.
13) Tighten the bolts which install the under side of
turbocharger lower cover.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
EX-00014
14) Install the under cover.
15) Lower the vehicle.
EX-00043
EX(H4DOTC)-12
EX-00011
EX-00017
EX-00009