Subaru IMPREZA GD 2007 Series Manual page 1567

asieps_tobira_IM_US.book 236 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
ENGINE (DIAGNOSTICS)
Step
1 CHECK FUEL LEVEL SENSOR.
1) Remove the fuel pump assembly. <Ref. to
FU(H4DOTC)-63, Fuel Pump.>
2) While moving the fuel level sensor float up
and down, make sure that the resistance
between fuel level sensor terminals changes
smoothly.
Terminals
No. 3 — No. 2:
2 CHECK FUEL SUB LEVEL SENSOR.
1) Remove the fuel sub level sensor. <Ref. to
FU(H4DOTC)-66, Fuel Sub Level Sensor.>
2) While moving the fuel sub level sensor float
up and down, make sure that the resistance
between fuel level sensor terminals changes
smoothly.
Terminals
No. 1 — No. 2:
Check
Does the resistance change
smoothly?
Does the resistance change
smoothly?
EN(STI)(diag)-236
Yes No
Go to step 2. Replace the fuel
level sensor. <Ref.
to FU(H4DOTC)-
65, Fuel Level Sen-
sor.>
Repair the connec- Replace the fuel
tor. sub level sensor.
<Ref. to
NOTE:
FU(H4DOTC)-66,
In this case, repair
Fuel Sub Level
the following item:
Sensor.>
• Poor contact in
ECM connector
• Poor contact of
combination meter
connector
• Poor contact of
coupling connector