Subaru IMPREZA GD 2007 Series Manual page 1737

asieps_tobira_IM_US.book 20 ページ ２０１２年１月１７日 火曜日 午後３時４８分
FUEL INJECTION (FUEL SYSTEMS)
26) Remove the bolts which hold the tumble gener-
ator assembly onto the cylinder head.
27) Remove the intake manifold.
B: INSTALLATION
1) Install the intake manifold onto cylinder heads.
NOTE:
Use a new gasket.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
2) Connect the fuel delivery hose, return hose, and
evaporation hose.
Intake Manifold
3) Connect the connector to the engine coolant
temperature sensor (A), oil pressure switch (B) and
crankshaft position sensor (C).
FU-03176
4) Connect the connector to the knock sensor.
5) Connect the connectors to camshaft position
sensor.
FU-03176
6) Connect the connector to the oil flow control so-
lenoid valve.
FU-02754
7) Connect the connector to the secondary air com-
bination valve.
FU(H4DOTC)-20
(A)
(B)
(C)
FU-00027
FU-02751
FU-02818
FU-03175