Fuel Pump - Subaru IMPREZA GD 2007 Series Manual

asieps_tobira_IM_US.book 63 ページ ２０１２年１月１７日 火曜日 午後３時４８分

26.Fuel Pump

A: REMOVAL
WARNING:
Place "NO OPEN FLAMES" signs near the
working area.
CAUTION:
Be careful not to spill fuel.
NOTE:
Fuel pump assembly consists of fuel pump, fuel fil-
ter and fuel level sensor.
1) Release the fuel
FU(H4DOTC)-55, RELEASING OF FUEL PRES-
SURE, PROCEDURE, Fuel.>
2) Disconnect the ground cable from the battery.
3) Open the fuel filler flap lid, and remove the fuel
filler cap.
4) Remove the trunk room mat. (Sedan model)
5) Remove the luggage floor mat. (Wagon model)
<Ref. to EI-61, REMOVAL, Luggage Floor Mat.>
6) Remove the service hole cover.
7) Disconnect the connector from fuel pump.
Fuel Pump
pressure. <Ref. to
FU-00009
FU-00105
FU-02363
FU(H4DOTC)-63
FUEL INJECTION (FUEL SYSTEMS)
8) Disconnect the quick connector and then discon-
nect the fuel delivery hose. <Ref. to FU(H4DOTC)-
70, REMOVAL, Fuel Delivery, Return and Evapo-
ration Lines.>
9) Move the clips, and disconnect the fuel return
hose (A) and jet pump hose (B).
(A)
10) Remove the nuts which install fuel pump as-
sembly onto fuel tank.
11) Remove the fuel pump assembly from the fuel
tank.
NOTE:
When removing, be careful not to let the float por-
tion of the fuel level sensor interfere with fuel tank.
FU-02364
FU-02566