Subaru IMPREZA GD 2007 Series Manual page 1778

asieps_tobira_IM_US.book 61 ページ ２０１２年１月１７日 火曜日 午後３時４８分
8) Tighten the bolts which hold fuel filler pipe brack-
et on the body.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.5 ft-lb)
9) Fasten the evaporation hoses to the clip of fuel
filler pipe.
10) Install the fuel filler pipe protector.
11) Lower the vehicle.
12) Install the rear wheel RH.
Tightening torque:
100 N·m (10.2 kgf-m, 73.8 ft-lb)
13) Connect the ground cable to the battery.
Fuel Filler Pipe
C: DISASSEMBLY
1) Move the clamp and disconnect the evaporation
hose from the joint pipe.
FU-00326
2) Remove the bolts which install joint pipe to the
fuel filler pipe.
FU-00098
3) Disconnect the evaporation hose from the fuel
filler pipe.
FU-00772
4) Remove the shut valve from the fuel filler pipe.
<Ref. to EC(H4DOTC)-19, REMOVAL, Shut
Valve.>
FU-00009
FU(H4DOTC)-61
FUEL INJECTION (FUEL SYSTEMS)
FU-00329
FU-00330
FU-00331