asieps_tobira_IM_US.book 362 ページ 2012年1月17日 火曜日 午後3時48分
Diagnostic Procedure with Diagnostic Trouble Code (DTC)
ENGINE (DIAGNOSTICS)
Step
13
CHECK HARNESS BETWEEN ECM AND
SECONDARY AIR COMBINATION VALVE
RELAY CONNECTOR.
Measure the resistance between the secondary
air combination valve relay connector and chas-
sis ground.
Connector & terminal
(F27) No. 14 — Chassis ground:
Check
Is the resistance 1 MΩ or more? Repair poor con-
EN(STI)(diag)-362
Yes
No
Repair the ground
tact of the ECM
short circuit of har-
connector.
ness between
ECM and second-
ary air pump relay
connector.