asieps_tobira_IM_US.book 45 ページ 2012年1月17日 火曜日 午後3時48分
15.Wastegate Control Solenoid
Valve
A: REMOVAL
1) Disconnect the ground cable from the battery.
2) Disconnect the engine harness connector (A)
from bracket.
3) Disconnect the connector (B) from wastegate
control solenoid valve.
4) Disconnect the connector (C) of front oxygen (A/
F) sensor from bracket.
5) Remove the bracket from vehicle body.
(B)
6) Disconnect pressure hose (D) from the waste-
gate control solenoid valve.
7) Remove the wastegate control solenoid valve
from the bracket
Wastegate Control Solenoid Valve
FU-00009
(A)
(C)
FU-02996
(D)
FU-02998
FU(H4DOTC)-45
FUEL INJECTION (FUEL SYSTEMS)
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
6.5 N·m (0.66 kgf-m, 4.8 ft-lb)
FU-02820