Fuel - Subaru IMPREZA GD 2007 Series Manual

asieps_tobira_IM_US.book 55 ページ ２０１２年１月１７日 火曜日 午後３時４８分

23.Fuel

A: PROCEDURE
1. RELEASING OF FUEL PRESSURE
WARNING:
Place "NO OPEN FLAMES" signs near the
working area.
CAUTION:
Be careful not to spill fuel.
1) Remove the glove box. <Ref. to EI-43, REMOV-
AL, Glove Box.>
2) Remove the passenger's side front side sill cov-
er.
3) Disconnect the connector from fuel pump relay.
4) Start the engine and run it until it stalls.
5) After the engine stalls, crank it for five more sec-
onds.
6) Turn the ignition switch to OFF.
2. DRAINING FUEL
WARNING:
Place "NO OPEN FLAMES" signs near the
working area.
CAUTION:
Be careful not to spill fuel.
1) Release the fuel pressure. <Ref. to FU(H4DOTC)-
55, RELEASING OF FUEL PRESSURE, PROCE-
DURE, Fuel.>
2) Disconnect the ground cable from the battery.
3) Remove the fuel pump. <Ref. to FU(H4DOTC)-
63, REMOVAL, Fuel Pump.>
Fuel
4) Drain fuel using a pump through where the fuel
pump was installed.
CAUTION:
Use a petrol resistance pump or the equivalent.
5) Install the fuel pump. <Ref. to FU(H4DOTC)-64,
INSTALLATION, Fuel Pump.>
FU-02737
FU-00009
FU(H4DOTC)-55
FUEL INJECTION (FUEL SYSTEMS)