Subaru IMPREZA GD 2007 Series Manual page 1744

asieps_tobira_IM_US.book 27 ページ ２０１２年１月１７日 火曜日 午後３時４８分
9) Install the harness bracket which holds the en-
gine harness to intake manifold.
Tightening torque:
19 N·m (1.94 kgf-m, 14.0 ft-lb)
10) Install the fuel injector.
11) Tighten the bolts which secure fuel injector pipe
onto intake manifold.
Tightening torque:
19 N·m (1.94 kgf-m, 14.0 ft-lb)
• LH side
Intake Manifold
• RH side
FU-02759
12) Tighten the two bolts which install the fuel pipe
on the LH side of intake manifold.
Tightening torque:
FU-00048 6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
13) Install the purge control solenoid valve. <Ref.
to EC(H4DOTC)-8, INSTALLATION, Purge Control
Solenoid Valve.>
FU-00044
FU-00618
FU(H4DOTC)-27
FUEL INJECTION (FUEL SYSTEMS)
FU-00046
FU-00619
FU-02758