asieps_tobira_IM_US.book 60 ページ 2012年1月17日 火曜日 午後3時48分
FUEL INJECTION (FUEL SYSTEMS)
16) Remove the air vent pipe together with the clips
from the body.
B: INSTALLATION
1) Open the fuel filler flap lid.
2) Set the fuel saucer (A) with rubber seal (C), and
insert the fuel filler pipe into hole from the inner side
of apron.
3) Align the holes in fuel filler pipe neck and set the
cup (B), and tighten the screws.
NOTE:
If the edges of rubber seal are folded toward the in-
side, straighten it with a screwdriver.
4) Connect the evaporation pipe.
Fuel Filler Pipe
5) Connect the evaporation hose to the fuel filler
pipe.
FU-00328
6) Connect the fuel filler hose (A) to the pipe with an
overlap of 35 — 40 mm (1.38 — 1.57 in).
7) Connect the evaporation hose (B) to the pipe
with an overlap of 25 — 30 mm (0.98 — 1.18 in).
L = 27.5
NOTE:
Do not allow the clips to touch other hoses and rear
suspension crossmember.
(A)
(B)
(C)
FU-00103
FU-00328
FU(H4DOTC)-60
±
±
2.5 mm (1.083
0.098 in)
(A)
(B)
( 1 )
(1) Hose
(2) Clip
(3) Pipe
FU-00325
FU-00101
( 2 )
( 3 )
L/2
L
FU-00104