asieps_tobira_IM_US.book 68 ページ 2012年1月17日 火曜日 午後3時48分
FUEL INJECTION (FUEL SYSTEMS)
30.Fuel Cut Valve
A: REMOVAL
WARNING:
Place "NO OPEN FLAMES" signs near the
working area.
CAUTION:
Be careful not to spill fuel.
1) Remove the fuel tank. <Ref. to FU(H4DOTC)-
56, REMOVAL, Fuel Tank.>
2) Remove the protect cover.
3) Move the clip and disconnect the evaporation
hose from the fuel cut valve.
4) Remove the nut which installs the fuel cut valve.
Fuel Cut Valve
B: INSTALLATION
Install in the reverse order of removal while being
careful of the following.
• Make sure the sealing portion is free from fuel or
foreign matter before installation.
NOTE:
Use a new gasket.
Tightening torque:
4.4 N·m (0.45 kgf-m, 3.3 ft-lb)
FU-00334
FU-02747
FU(H4DOTC)-68
FU-02748