Subaru IMPREZA GD 2007 Series Manual page 1781

asieps_tobira_IM_US.book 64 ページ ２０１２年１月１７日 火曜日 午後３時４８分
FUEL INJECTION (FUEL SYSTEMS)
B: INSTALLATION
Install in the reverse order of removal while being
careful of the following.
• Make sure the sealing portion is free from fuel or
foreign matter before installation.
• Tighten the nuts in alphabetical sequence shown
in the figure to the specified torque.
NOTE:
Use a new gasket and retainer.
Tightening torque:
4.4 N·m (0.45 kgf-m, 3.3 ft-lb)
( C )
( H )
( F )
C: INSPECTION
Connect the lead harness to the connector terminal
of fuel pump, and apply the battery power supply to
check whether the pump operates.
WARNING:
• Wipe off fuel completely.
• Keep the battery as far apart from fuel pump
as possible.
• Be sure to perform the ON/OFF operation on
the battery side.
• Do not run the fuel pump for a long time un-
der non-load condition.
3 2 1
6 5 4
Fuel Pump
( A )
( E )
( G )
( D )
( B )
FU-02567
FU-00332
FU(H4DOTC)-64