Subaru IMPREZA GD 2007 Series Manual page 1710

asieps_tobira_IM_US.book 11 ページ ２０１２年１月１７日 火曜日 午後３時４８分
14) Vertically draw out clip from crossmember.
15) Separate the center exhaust pipe from rear ex-
haust pipe.
16) Remove the bolt which holds center exhaust
pipe bracket to transmission.
17) Remove the intercooler bracket.
18) Remove the bolt which holds center exhaust
pipe to hanger bracket.
CAUTION:
Be careful not to pull down the center exhaust
pipe.
Center Exhaust Pipe
19) Remove the center exhaust pipe.
FU-00082
B: INSTALLATION
1) Install the center exhaust pipe and temporarily
tighten the bolt which holds center exhaust pipe to
hanger bracket.
2) Temporarily tighten the bolt which holds the cen-
ter pipe to transmission.
3) Connect the center exhaust pipe to turbocharg-
er.
NOTE:
Use a new gasket.
Tightening torque:
EX-02091
35 N·m (3.6 kgf-m, 26 ft-lb)
4) Install the center exhaust pipe to rear exhaust
EX-00014
pipe.
NOTE:
Use a new gasket.
Tightening torque:
18 N·m (1.8 kgf-m, 13 ft-lb)
EX-00043
EX(H4DOTC)-11
EXHAUST
EX-00016
EX-00012
EX-02091