asieps_tobira_IM_US.book 58 ページ 2012年1月17日 火曜日 午後3時48分
FUEL INJECTION (FUEL SYSTEMS)
8) Tighten the band mounting bolts.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
9) Install the rear crossmember. <Ref. to RS-17,
INSTALLATION, Rear Crossmember.>
10) Connect connector (A) to the fuel tank cord and
plug the service hole with grommet (B).
11) Set the rear seat and floor mats.
12) Connect the connector to fuel pump relay.
13) Install the passenger's side front side sill cover.
14) Install the glove box. <Ref. to EI-43, INSTAL-
LATION, Glove Box.>
Fuel Tank
15) Connect the ground cable to the battery.
C: INSPECTION
FU-00411
1) Check that there are no cracks, holes or other
damage to the fuel tank.
2) Make sure that the fuel pipe and fuel hose are
not cracked and that the connections are tight.
(A)
(B)
FU-02739
FU-02737
FU(H4DOTC)-58
FU-00009