Subaru IMPREZA GD 2007 Series Manual page 1739

asieps_tobira_IM_US.book 22 ページ ２０１２年１月１７日 火曜日 午後３時４８分
FUEL INJECTION (FUEL SYSTEMS)
14) Connect the pressure hose to the intake duct.
15) Install the power steering pump.
(1) Install the reservoir tank to the bracket.
(2) Connect the power steering pump switch to
the connector.
(3) Install the power steering pump. <Ref. to
PS-60, INSTALLATION, Oil Pump.>
Intake Manifold
(4) Install the power steering pipe bracket onto
the right side intake manifold.
FU-00024
(5) Install the front side V-belt. <Ref. to
ME(H4DOTC)-44, INSTALLATION, V-belt.>
16) Install the coolant filler tank. <Ref. to
CO(H4DOTC)-35, INSTALLATION, Coolant Filler
Tank.>
17) Install the intercooler. <Ref. to IN(H4DOTC)-
14, INSTALLATION, Intercooler.>
18) Install the air cleaner element.
19) Install the air cleaner upper cover and air intake
duct as a unit. <Ref. to IN(H4DOTC)-10, INSTAL-
LATION, Air Cleaner Case.>
FU-02572
20) Connect the connector to fuel pump relay.
21) Install the passenger's side front side sill cover.
FU-00017
22) Install the glove box. <Ref. to EI-43, INSTAL-
LATION, Glove Box.>
23) Connect the ground cable to the battery.
FU-00019
24) Lift up the vehicle.
25) Install the under cover.
26) Fill engine coolant. <Ref. to CO(H4DOTC)-19,
FILLING OF ENGINE COOLANT, REPLACE-
MENT, Engine Coolant.>
FU(H4DOTC)-22
ME-00036
FU-02737
FU-00009