asieps_tobira_IM_US.book 33 ページ 2012年1月17日 火曜日 午後3時48分
7. Oil Flow Control Solenoid
Valve
A: REMOVAL
Oil flow control solenoid valve is a unit with cam-
shaft cap.
Refer to "Camshaft" for removal procedure. <Ref.
to ME(H4DOTC)-58, REMOVAL, Camshaft.>
B: INSTALLATION
Refer to "Camshaft" for installation procedure.
<Ref. to ME(H4DOTC)-59, INSTALLATION, Cam-
shaft.>
C: DISASSEMBLY
1) Remove the 2 mounting bolts and remove the oil
return cover and gasket.
2) Remove the mounting bolt and remove the oil
flow control solenoid valve.
(D)
(C)
(A) Oil flow control solenoid valve
(B) Oil return cover
(C) Gasket
(D) Camshaft cap
D: ASSEMBLY
1) Install the oil flow control solenoid valve.
Tightening torque:
8 N·m (0.8 kgf-m, 5.9 ft-lb)
2) Apply liquid gasket to the two bolts which secure
the oil return cover.
Liquid gasket:
THREE BOND 1324 (Part No. 004403042) or
equivalent
Oil Flow Control Solenoid Valve
(B)
(A)
FU-03158
FU(H4DOTC)-33
FUEL INJECTION (FUEL SYSTEMS)
3) Attach the oil return cover and gasket.
Tightening torque:
8 N·m (0.8 kgf-m, 5.9 ft-lb)
NOTE:
Use a new gasket.
(D)
(C)
(B)
(A) Oil flow control solenoid valve
(B) Oil return cover
(C) Gasket
(D) Camshaft cap
(A)
FU-03158