Subaru IMPREZA GD 2007 Series Manual page 1789

asieps_tobira_IM_US.book 72 ページ ２０１２年１月１７日 火曜日 午後３時４８分
FUEL INJECTION (FUEL SYSTEMS)
(1) Set the new retainer (B) to connector (A).
(2) Push the pipe into the connector completely.
( A )
(A) Connector
(B) Retainer
(C) Pipe
CAUTION:
• Pull the connector to ensure it is connected
securely.
• Make sure the two retainer pawls are en-
gaged in their mating positions in the connec-
tor.
• Be sure to inspect hoses and their connec-
tions for any leakage of fuel.
( A )
(A) Connector
(B) Retainer
(C) Pipe
Fuel Delivery, Return and Evaporation Lines
( B )
( C )
FU-00126
( B )
( C )
FU-00127
FU(H4DOTC)-72
2) Connect the fuel delivery hose and return hose
to the pipe with an overlap of 20 to 25 mm (0.79 to
0.98 in).
Type A: When the amount to be inserted is speci-
fied.
Type B: When the amount to be inserted is not
specified.
± ±
: 2.5 1.5 mm (0.098 0.059 in)
2
± ±
L: 22.5 2.5 mm (0.886 0.098 in)
CAUTION:
Be sure to inspect hoses and their connections
for any leakage of fuel.
(3) (4)
(1)
L
(2)
(1) Type A
(2) Type B
(3) Pipe
(4) Clamp
(5) Hose
3) Connect the evaporation hose to the pipe with
an overlap of 15 to 20 mm (0.59 to 0.79 in).
± ±
L = 17.5 2.5 mm (0.689 0.098 in)
(1)
(1) Hose
(2) Clip
(3) Pipe
C: INSPECTION
1) Make sure that there are no cracks on the fuel
pipes and fuel hoses.
2) Check that the fuel pipe and fuel hose connec-
tions are connected securely.
(5)
FU-00128
(2) (3)
L/2
L
FU-00129