Default Gateways - Lenovo ThinkSystem NE2552E Application Manual

5. At the prompt, enter y to enable the IP interface or n to leave it disabled:
6. The system prompts you to configure another interface:

Default Gateways

1. At the prompt, select an IP default gateway for configuration or skip default
2. At the prompt, enter the IPv4 address for the selected default gateway:
3. At the prompt enter y to enable the default gateway or n to leave it disabled:
4. The system prompts you to configure another default gateway:
5. At the prompt enter y to enable the default gateway or n to leave it disabled:
66
NE2552E Application Guide for ENOS 8.4
Enable IP interface? [y/n]
Enter interface number:
Repeat the steps in this section until all IP interfaces have been configured. When
all interfaces have been configured, press <Enter> without specifying any interface
number.
gateway configuration:
IP default gateways:
Enter default IPv4 gateway number: (1-2, 3, 4)
Enter the number for the IP default gateway to be configured. To skip default
gateway configuration, press <Enter> without typing a gateway number and go to
"IP Routing" on page 67.
Current IP address:
Enter new IP address:
Enter the IPv4 address in dotted decimal notation, or press <Enter> without
specifying an address to accept the current setting.
Enable default gateway? [y/n]
Enter default IPv6 gateway number: (1, 3, 4)
Enable default gateway? [y/n]
Repeat the steps in this section until all default gateways have been configured.
When all default gateways have been configured, press <Enter> without
specifying any number.
(1-125, 127)
0.0.0.0