Lenovo Enos Extensions To Vrrp - Lenovo ThinkSystem NE2552E Application Manual

Flex switch lenovo enterprise network operating system 8.4
Hide thumbs Also See for ThinkSystem NE2552E:
Table of Contents

Advertisement

Lenovo ENOS Extensions to VRRP

© Copyright Lenovo 2018
This section describes VRRP enhancements that are implemented in Lenovo 
ENOS.
Lenovo ENOS supports a tracking function that dynamically modifies the priority 
of a VRRP router, based on its current state. The objective of tracking is to have, 
whenever possible, the master bidding processes for various virtual routers in a 
LAN converge on the same switch. Tracking ensures that the selected switch is the 
one that offers optimal network performance. For tracking to have any effect on 
virtual router operation, preemption must be enabled.
Lenovo ENOS can track the attributes listed in Table
Table 31.
VRRP Tracking Parameters
Parameter
Number of IP interfaces on the 
switch that are active ("up")
tracking-priority-increment
interfaces
Number of active ports on the same 
VLAN
tracking-priority-increment
ports
Number of virtual routers in master 
mode on the switch
tracking-priority-increment
virtual-routers
Each tracked parameter has a user‐configurable weight associated with it. As the 
count associated with each tracked item increases (or decreases), so does the VRRP 
routerʹs priority, subject to the weighting associated with each tracked item. If the 
priority level of a standby is greater than that of the current master, then the 
standby can assume the role of the master.
See "Configuring the Switch for Tracking" on page
configure the switch for tracking VRRP priority.
31 :  
Description
Helps elect the virtual routers with the 
most available routes as the master. (An IP 
interface is considered active when there 
is at least one active port on the same 
VLAN.) This parameter influences the 
VRRP routerʹs priority in virtual interface 
routers.
Helps elect the virtual routers with the 
most available ports as the master. This 
parameter influences the VRRP routerʹs 
priority in virtual interface routers.
Note: In a hot‐standby configuration, only 
external ports are tracked.
Useful for ensuring that traffic for any 
particular client/server pair is handled by 
the same switch, increasing routing 
efficiency. This parameter influences the 
VRRP routerʹs priority in virtual interface 
routers.
452 for an example on how to 
Chapter 32: Virtual Router Redundancy Protocol
451

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents