Setting The Failover Limit - Lenovo ThinkSystem NE2552E Application Manual

Setting the Failover Limit

440
NE2552E Application Guide for ENOS 8.4
Figure 53. Two LAGs, one Failover Trigger
Internet
Enterprise
Routing Switch
The failover limit lets you specify the minimum number of operational links
required within each trigger before the trigger initiates a failover event. For
example, if the limit is two, a failover event occurs when the number of operational
links in the trigger is two or fewer. When you set the limit to zero, the switch
triggers a failover event only when no links in the trigger are operational.
Trigger 1
Switch 1
Trigger 1
Switch 2
Server 1
Server 2
Server 3
Server 4
VLAN 1:
VLAN 2:
VLAN Monitor = Off