Table of Contents
Advertisement
80
NE2552E Application Guide for ENOS 8.4
Below is an example of a successful recovery procedure using TFTP:
Entering Rescue Mode.
Please select one of the following options:
T) Configure networking and tftp download an image
X) Use xmodem 1K to serial download an image
P) Physical presence test (low security mode)
F) Filesystem Menu
I) Select which image to boot
C) Select configuration block to use
R) Reboot
E) Exit
Option? : t
Performing TFTP rescue. Please answer the following questions (enter 'q'
to quit):
IP addr :10.241.6.4
Netmask :255.255.255.128
Gateway :10.241.6.66
Server addr:10.72.97.135
Image Filename: NE2552E-8.3.1.0_OS.img
Netmask : 255.255.255.128
Gateway : 10.241.6.66
Configuring management port.......................
Installing image NE2552E-8.3.1.0_OS.img from TFTP server 10.72.97.135
Extracting images ... Do *NOT* power cycle the switch.
Installing Application: Image signature verified.
Install image as image 1 or 2 (hit return to just boot image): 2
Installing image as image2: 100%
Image2 updated succeeded
Updating install log. File NE2552E-8.3.1.0_OS.img installed from
10.72.97.135 at 15:29:30 on 12-3-2015Please select one of the following
options:
T) Configure networking and tftp download an image
X) Use xmodem 1K to serial download an image
P) Physical presence test (low security mode)
F) Filesystem Menu
I) Select which image to boot
C) Select configuration block to use
R) Reboot
E) Exit
Option? :
- Quick Links:
- Part 3: Switch Basics
Hide quick links:
Advertisement
Table of Contents
