Re-Enabling Locked Accounts; Listing Current Users; Logging In To An End User Account - Lenovo ThinkSystem NE2552E Application Manual

Re-enabling Locked Accounts

Listing Current Users

Logging In to an End User Account

96
NE2552E Application Guide for ENOS 8.4
The administrator can re‐enable a locked account by reloading the switch or by
using the following command:
NE2552E(config)# access user strong-password clear local user lockout
username <user name>
However, the above command cannot be used to re‐enable an account disabled by
the administrator.
To re‐enable all locked accounts, use the following command:
NE2552E(config)# access user strong-password clear local user lockout all
The show access user command displays defined user accounts and whether
or not each user is currently logged into the switch.
NE2552E# show access user
Usernames:
user - Enabled - offline
oper - Disabled - offline
admin - Always Enabled - online 1 session
Current User ID table:
1: name USERID , ena, cos admin
2: name jane , ena, cos user
3: name john , ena, cos user
Once an end user account is configured and enabled, the user can login to the
switch, using the username/password combination. The level of switch access is
determined by the Class of Service established for the end user account.
, password valid, offline
, password valid, online
, password valid, online