3. Set each server and workstation's default gateway to the appropriate switch IP
4. Configure the default gateways to the routers' addresses.
5. Verify the configuration.
318
NE2552E Application Guide for ENOS 8.4
interface (the one in the same subnet as the server or workstation).
Configuring the default gateways allows the switch to send outbound traffic to the
routers:
NE2552E(config)# ip gateway 1 address 205.21.17.1 enable
NE2552E(config)# ip gateway 2 address 205.21.17.2 enable
NE2552E(config)# show interface ip
Examine the resulting information. If any settings are incorrect, make the
appropriate changes.