User Configuration Example - Lenovo ThinkSystem NE2552E Application Manual

User Configuration Example

1. To configure a user with name "admin," authentication type MD5, and
2. Configure a user access group, along with the views the group may access. Use the
3. Assign the user to the user group. Use the group table to link the user to a
480
NE2552E Application Guide for ENOS 8.4
authentication password of "admin," privacy option DES with privacy password
of "admin," use the following ISCLI commands.
NE2552E(config)# snmp-server user 5 name admin
NE2552E(config)# snmp-server user 5 authentication-protocol md5
authentication-password
Changing authentication password; validation required:
Enter current admin password:
Enter new authentication password:
Re-enter new authentication password: <auth. password>
New authentication password accepted.
NE2552E(config)# snmp-server user 5 privacy-protocol des privacy-password
Changing privacy password; validation required:
Enter current admin password:
Enter new privacy password:
Re-enter new privacy password:
New privacy password accepted.
access table to configure the group's access level.
NE2552E(config)# snmp-server access 5 name admingrp
NE2552E(config)# snmp-server access 5 level authpriv
NE2552E(config)# snmp-server access 5 read-view iso
NE2552E(config)# snmp-server access 5 write-view iso
NE2552E(config)# snmp-server access 5 notify-view iso
Because the read view, write view, and notify view are all set to "iso," the user
type has access to all private and public MIBs.
particular access group.
NE2552E(config)# snmp-server group 5 user-name admin
NE2552E(config)# snmp-server group 5 group-name admingrp
If you want to allow user access only to certain MIBs, see "View‐Based
Configuration," next.
<admin. password>
<auth. password>
<admin. password>
<privacy password>
<privacy password>