Ip Routing - Lenovo ThinkSystem NE2552E Application Manual

IP Routing

© Copyright Lenovo 2018
When IP interfaces are configured for the various IP subnets attached to your
switch, IP routing between them can be performed entirely within the switch. This
eliminates the need to send inter‐subnet communication to an external router
device. Routing on more complex networks, where subnets may not have a direct
presence on the NE2552E, can be accomplished through configuring static routes
or by letting the switch learn routes dynamically.
This part of the Setup program prompts you to configure the various routing
parameters.
At the prompt, enable or disable forwarding for IP Routing:
Enable IP forwarding? [y/n]
Enter y to enable IP forwarding. To disable IP forwarding, enter n. To keep the
current setting, press <Enter>.
67
Chapter 2: Initial Setup