5. At the prompt, enter y to enable the IP interface or n to leave it disabled:
6. The system prompts you to configure another interface:
Default Gateways
1. At the prompt, select an IP default gateway for configuration or skip default
2. At the prompt, enter the IPv4 address for the selected default gateway:
3. At the prompt enter y to enable the default gateway or n to leave it disabled:
4. The system prompts you to configure another default gateway:
68
CN4093 Application Guide for N/OS 8.4
Enable IP interface? [y/n]
Enter interface number: (1-128)
Repeat the steps in this section until all IP interfaces have been configured. When
all interfaces have been configured, press <Enter> without specifying any interface
number.
gateway configuration:
IP default gateways:
Enter default gateway number: (1-3, 4)
Enter the number for the IP default gateway to be configured. To skip default
gateway configuration, press <Enter> without typing a gateway number and go to
"IP Routing" on page
69.
Current IP address:
Enter new IP address:
Enter the IPv4 address in dotted decimal notation, or press <Enter> without
specifying an address to accept the current setting.
Enable default gateway? [y/n]
Enter default gateway number: (1-4)
Repeat the steps in this section until all default gateways have been configured.
When all default gateways have been configured, press <Enter> without
specifying any number.
0.0.0.0