Application Example For Proxy Arp; Arp; Arp Table - TP-Link T3700G-52TQ User Manual
Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
10.6.3 Application Example for Proxy ARP
Network Requirements
1.
PC A and PC B are in the same network segment but belong to VLAN2 and VLAN3
respectively.
2.
The IP address of PC A is 192.168.2.10/16 and the IP address of PC B is 192.168.3.11/16.
3.
PC A and PC B can interconnect with each other by using Proxy ARP function.
Network Diagram
Configuration Procedure
Configure the Switch
Step Operation
1
Create VLAN
2
Create VLAN
Interface 2
3
Create VLAN
Interface 3
4
Enable Proxy
ARP
10.7 ARP
This page displays the ARP table information and you can configure static ARP here.
10.7.1 ARP Table
Choose the menu Routing → ARP → ARP Table to load the following page.
Description
Required. On page VLAN→802.1Q VLAN→VLAN Config, create
VLAN 2 and VLAN 3, and configure their ports.
Required. On Routing→Interface→Interface Config page, create
VLAN Interface 2 with its IP address as 192.168.2.1, subnet mask as
255.255.255.0 and interface name as VLAN2.
Required. On Routing→Interface→Interface Config page, create
VLAN Interface 3 with its IP address as 192.168.3.1, subnet mask as
255.255.255.0 and interface name as VLAN3.
Required. On Routing→Proxy ARP→Proxy ARP page, enable Proxy
ARP feature for VLAN interface 2 and VLAN interface 3.
191
Advertisement
Table of Contents
