Port Security - TP-Link T3700G-52TQ User Manual
Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
LAG:
Note:
The member port of a LAG cannot be set as a monitoring port or monitored port.
1.
A port cannot be set as the monitoring port and monitored port at the same time.
2.
6.1.3 Port Security
You can use this feature to limit the number of MAC addresses that can be learned on each
port, thus preventing the MAC address table from being exhausted by the attack packets.
Choose the menu Switching→Port→Port Security to load the following page.
Configuration Procedure:
1)
Select one or multiple ports for security configuration.
2)
Specify the maximum number of the MAC addresses that can be learned on the port, and
then select the learn mode of the MAC addresses.
3)
Select the status of the port security feature.
4)
Click Apply to make the settings effective.
Displays the LAG number which the port belongs to.
Figure 6-4 Port Security
57
Advertisement
Table of Contents
