TP-Link T3700G-52TQ User Manual page 386

Configuration Procedure:
Set the community name, access rights and the related view. Click Create.
Entry Description:
Community Config

Community Name:
Access:
MIB View:
IP Address:
Community Table

Select:
Community Name:
Access:
MIB View:
IP Address:
Operation:
Figure 15-7 SNMP Community
Enter the Community Name here.
Defines the access rights of the community.
read-only: Management right of the Community is
•
restricted to read-only, and changes cannot be made to
the corresponding View.
read-write: Management right of the Community is
•
read-write and
corresponding View.
Select the MIB View for the community to access.
Enter the IP address which could connect the SNMP server. If
null, all user could connect the SNMP server.
Select the desired entry to delete the corresponding
Community. It is multi-optional.
Displays the Community Name here.
Displays the right of the Community to access the View.
Displays the Views which the Community can access.
Displays the IP address of the SNMP Community.
Click the Edit button to modify the MIB View and the Access
right of the Community, and then click the Modify button to
apply.
373
changes can be made to the