Protocol Group; Protocol Template - TP-Link T3700G-52TQ User Manual
Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
Protocol Name:
VLAN ID:
Member:
Operate:
7.5.2 Protocol Group
On this page, you can configure the Protocol Group.
Choose the menu VLAN→Protocol VLAN→Protocol Group to load the following page.
Configuration Procedure:
1)
Specify a Template ID and a VLAN ID.
2)
Add your desired ports into this protocol group.
3)
Click Apply to make the settings effective.
Entry Description:
Template Id:
VLAN ID:
7.5.3 Protocol Template
The Protocol Template should be created before configuring the Protocol VLAN. You can add
your desired Protocol Template on this page.
Displays the protocol of the protocol group.
Displays the corresponding VLAN ID of the protocol.
Displays the member of the protocol group.
Click the Edit button to modify the settings of the entry.
Figure 7-10 Configure Protocol Group
Specify a template ID for this group.
Enter the ID number of the Protocol VLAN. This VLAN should be
one of the 802.1Q VLANs the ingress port belongs to.
90
Advertisement
Table of Contents
