System Ipv6 - TP-Link T3700G-52TQ User Manual

Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs Also See for T3700G-52TQ:
Table of Contents

Advertisement

The following entries are displayed on this screen:
DST Config
DST Status:
Predefined Mode:
Recurring Mode:
Date Mode:
Note:
When the DST is disabled, the predefined mode, recurring mode and date mode cannot be
configured.

4.1.5 System IPv6

On this page you can configure IPv6 address on the switch and login the switch through the
address to access the IPv6 applications. Internet Protocol Version 6 (IPv6), also called IP next
generation (IPng), is designed by the Internet Engineering Task Force (IETF) as the successor to
Internet Protocol Version 4 (IPv4). The significant difference between IPv6 and IPv4 is that IPv6
increases the IP address size from 32 bits to 128 bits.
Choose the menu System → System Info → System IPv6 to load the following page.
Enable or disable DST.
Select a predefined DST configuration:
USA: Second Sunday in March, 02:00 ~ First Sunday in
November, 02:00.
Europe: Last Sunday in March, 01:00 ~ Last Sunday in
October, 01:00.
Specify the DST configuration in recurring mode. This
configuration is recurring in use:
Offset: Specify the time adding in minutes when Daylight
Saving Time comes.
Start/End Time: Select starting time and ending time of
Daylight Saving Time.
Specify the DST configuration in Date mode. This
configuration is one-off in use:
Offset: Specify the time adding in minutes when Daylight
Saving Time comes.
Start/End Time: Select starting time and ending time of
Daylight Saving Time.
19

Advertisement

Table of Contents
loading

Table of Contents