Pim Sm Neighbor; Bsr - TP-Link T3700G-52TQ User Manual

11.4.2 PIM SM Neighbor

PIM SM neighbor is automatically learned by sending and receiving Hello Packets when PIM SM
is enabled.
Choose the menu Multicast Routing→PIM SM→PIM SM Neighbor to load the following page.
The following entries are displayed on this screen:
Search Option

Search Option:
PIM SM Neighbor

Interface:
Neighbor:
Uptime:
Expires:

11.4.3 BSR

PIM SM uses a Bootstrap Router (BSR), which advertises information to other multicast routers
about the rendezvous point (RP). In a given network, a set of routers can be administratively
enabled as candidate bootstrap routers(C-BSR). If it is not apparent which router should be the
BSR, the candidates flood the domain with advertisements. The router with the highest priority
is elected. If all the priorities are equal, then the candidate with the highest IP address becomes
the BSR.
Figure 11-21 PIM SM neighbor
ALL: Displays all entries.

Neighbor: Select Neighbor and enter the neighbor

address of your desired entry.
Interface: Select Interface VLAN and enter the interface

ID of your desired entry.
Interface Routed Port: Select Interface Routed Port and

enter the interface ID of your desired entry.
The physical interface on which PIM DM is enabled.
The IP address of the PIM neighbor for which this entry
contains information.
The time since the PIM neighbor (last) became a neighbor of
the local switch.
The time remaining before the PIM neighbor will be aged out.
281