TP-Link T3700G-52TQ User Manual page 245

Transit Area ID:
Neighbor Router ID:
Retransmit Interval:
Hello Interval:
Dead Interval:
Transmit Delay:
Authentication
Type:
Simple Key:
MD5 Key ID:
MD5 Key:
Displays the transit area ID of the virtual link.
Displays the neighbor router ID of the virtual link.
The retransmit interval for the specified interface. This is the
number of seconds between link-state advertisements for
adjacencies belonging to this router interface. This value is
also used when retransmitting database descriptions and
link-state request packets. The valid value ranges from 1 to
65535 seconds and the default is 5 seconds.
The hello interval for the specified interface in seconds. This
parameter must be the same for all routers attached to a
network. The valid value ranges from 1 to 65535 seconds
and the default is 10 seconds.
The dead interval for the specified interface in seconds. This
specifies how long a router will wait to see a neighbor
router's Hello packets before declaring that the router is
down. This parameter must be the same for all routers
attached to a network. The valid value ranges from 1 to
65535 seconds and the default is 40.
The Transit Delay for the specified interface. This specifies
the estimated number of seconds it takes to transmit a link
state update packet over the selected interface. The valid
value ranges from 1 to 65535 seconds and the default is 1
second.
You may select an authentication type other than none by
clicking on the 'Authentication Type' button. The choices
are:
null: No authentication.

simple: Use simple password.

md5: Use md5 message-digest algorithm.

Displays the active simple password of the interface.
Displays the active MD5 key ID of the interface.
Displays the active MD5 key of the interface.
232