Port Config - TP-Link T3700G-52TQ User Manual
Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
Configuration Procedure:
1)
Configure the number of LLDP-MED frames which will be transmitted fast.
2)
View Device Class of the device.
Entry Description:
Fast Start Count:
Device Class:
16.4.2 Port Config
On this page you can configure all ports' LLDP-MED parameters.
Choose the menu LLDP → LLDP-MED → Port Config to load the following page.
Figure 16-6 LLDP-MED Global Configuration
When LLDP-MED fast start mechanism is activated, multiple
LLDP-MED frames will be transmitted (the number of frames
equals this parameter).
LLDP-MED fast start mechanism will be activated when
LLDP-MED status changes from disable to enable. The device
will transmit a specified number of LLDP-MED frames fast then
the transmit interval will return to normal.
LLDP-MED devices are comprised of two primary device types:
Network Connectivity Devices and Endpoint Devices. In turn,
Endpoint Devices are composed of three defined Classes: Class
I, Class II and Class III. Bridge is a Network Connectivity Device.
396
Advertisement
Table of Contents
