Radius Server Config; Tacacs+ Server Config - TP-Link T3700G-52TQ User Manual

14.7.1 RADIUS Server Config

This page is used to configure the authentication servers running the RADIUS security
protocols.
Choose the menu Network Security→AAA→RADIUS Conifg to load the following page.
Configuration Procedure:
Configure the RADIUS server's IP and other relevant parameters under the Server Config.
View, edit and delete the configured RADIUS servers in the Server List.
Entry Description:
Server IP:
Shared Key:
Auth Port:
Acct Port:
Retransmit:
Timeout:

14.7.2 TACACS+ Server Config

This page is used to configure the authentication servers running the TACACS+ security
protocols.
Enter the IP of the server running the RADIUS secure protocol.
Enter the shared key between the RADIUS server and the switch.
The RADIUS server and the switch use the key string to encrypt
passwords and exchange responses.
Specify the UDP destination port on the RADIUS server for
authentication requests.
Specify the UDP destination port on the RADIUS server for
accounting requests.
Specify the number of times a request is resent to a server if the
server does not respond.
Specify the time interval that the switch waits for the server to
reply before resending.
359