Stp Config - TP-Link T3700G-52TQ User Manual

8.1 STP Config

The STP Config function, for global configuration of spanning trees on the switch, can be
implemented on STP Config and STP Summary pages.
8.1.1 STP Config
Before configuring spanning trees, you should make clear the roles each switch plays in each
spanning tree instance. Only one switch can be the root bridge in each spanning tree. On this
page you can globally configure the spanning tree function and related parameters.
Choose the menu Spanning Tree→STP Config→STP Config to load the following page.
Configuration Procedure:
1) Enable spanning tree function, select the STP mode, and click Apply.
2) Configure the related parameters and click Apply.
Entry Description:
Global Config

Spanning Tree:
Mode:
Figure 8-4 STP Config
Enable or disable STP function globally on the switch.
Select the desired STP mode on the switch.
STP: Specify the spanning tree mode as STP (Spanning Tree

Protocol).
RSTP: Specify the spanning tree mode as RSTP (Rapid Spanning

Tree Protocol).
MSTP: Specify the spanning tree mode as MSTP (Multiple

Spanning Tree Protocol).
111