The following entries are displayed on this screen:
VLAN Info
VLAN ID:
Name:
Untagged port:
UNIT:
Tagged port:
7.1.2 Port Config
Before creating the 802.1Q VLAN, please acquaint yourself with all the devices connected to
the switch in order to configure the ports properly.
Choose the menu VLAN→802.1Q VLAN→Port Config to load the following page.
Figure 7-4 Create or Modify 802.1Q VLAN
Enter the ID number of VLAN.
Displays the user-defined name of VLAN.
Displays the untagged port which is ACCESS, TRUNK or
GENERAL.
Select the unit ID of the desired member in the stack.
Displays the tagged port which is TRUNK or GENERAL.
82