Dhcp Snooping - TP-Link T3700G-52TQ User Manual

Configuration Procedure:
Specify the IP address, MAC address, VLAN ID and port number, and click Bind.
Entry Description:
IP Address:
MAC Address:
VLAN ID:
Port:
UNIT:

14.2 DHCP Snooping

Nowadays, the network is getting larger and more complicated. The amount of the PCs always
exceeds that of the assigned IP addresses. The wireless network and the laptops are widely
used and the locations of the PCs are always changed. Therefore, the corresponding IP
address of the PC should be updated with a few configurations. DHCP (Dynamic Host
Configuration Protocol, the network configuration protocol optimized and developed basing on
the BOOTP, functions to solve the above mentioned problems.
DHCP Working Principle

DHCP works via the "Client/Server" communication mode. The Client applies to the Server for
configuration. The Server assigns the configuration information, such as the IP address, to the
Client, so as to reach a dynamic employ of the network source. A Server can assign the IP
address for several Clients, which is illustrated in the following figure. For details about the
DHCP Server function, please refer to
Figure 14-2 Manual Binding
Enter the IP Address of the Host.
Enter the MAC Address of the Host.
Enter the VLAN ID.
Select the number of port connected to the Host.
Select the unit ID of the desired member in the stack.
10.4 DHCP Server.
336