TP-Link T3700G-52TQ User Manual page 49

Choose the menu System → Access Security → SSH Config to load the following page.
The following entries are displayed on this screen
Global Config

SSH:
Protocol V1:
Protocol V2:
Idle Timeout:
Max Connect:
Figure 4-21 SSH Config
:
Enable or disable SSH function.
Enable or disable SSH V1 to be the supported protocol.
Enable or disable SSH V2 to be the supported protocol.
Specify the idle timeout time. The system will automatically
release the connection when the time is up. The default time is
120 seconds.
Specify the maximum number of the connections to the SSH
server. No new connection will be established when the number
of the connections reaches the maximum number you set. The
default value is 5.
36