TP-Link T3700G-52TQ User Manual page 47

SSL Version 3:
TLS Version 1:
CipherSuite Config

RSA_WITH_RC4_128_MD5:
RSA_WITH_RC4_128_SHA:
RSA_WITH_DES_CBC_SHA:
RSA_WITH_3DES_EDE_CBC_SHA:
Session Config

Hard Timeout:
Soft Timeout:
Maximum Sessions:
Certificate and Key Management

You can get the status of the DSA and RSA keys, which can also be generated or deleted
here with the Generate and Delete buttons.
Certificate and Key:
Certificate Download

Certificate File:
Key Download

Key File:
Note:
1. HTTPS function can not be enabled until the SSL certificate and key are present.
2. The SSL certificate and key downloaded must match each other; otherwise the HTTPS
connection will not work.
Enable or disable Secure Sockets Layer Version 3.0. By default,
it's enabled.
Enable or disable Transport Layer Security Version 1.0. By
default, it's enabled.
Key exchange with RC4 128-bit encryption and
MD5 for message digest. By default, it's enabled.
Key exchange with RC4 128-bit encryption and
SHA for message digest. By default, it's enabled.
Key exchange with DES-CBC for message
encryption and SHA for message digest. By
default, it's enabled.
Key exchange with 3DES and DES-EDE3-CBC
for message encryption and SHA for message
digest. By default, it's enabled.
Configure hard timeout of HTTP sessions.
Configure soft timeout of HTTP sessions.
Configure maximum allowable number of HTTP sessions.
The status of SSL certificate and key file (PEM Encoded) on the
device, which might be Present or Absent.
Select the desired certificate to download to the switch. The
certificate must be BASE64 encoded.
Select the desired key to download to the switch. The key must
be BASE64 encoded.
34