Port Config - TP-Link T3700G-52TQ User Manual

9.1.2 Port Config

On this page you can configure the IGMP feature for ports of the switch.
Choose the menu Multicast→IGMP Snooping→Port Config to load the following page.
The following entries are displayed on this screen:
Port Config

UNIT:
Select:
Port:
IGMP Snooping:
Fast Leave:
Member Port Time:
Router Port Time:
Figure 9-5 Port Config
Select the unit ID of the desired member in the stack.
Select the desired
configuration. It is multi-optional.
Displays the port of the switch.
Enable or disable IGMP Snooping for the desired port.
Enable or disable Fast Leave feature for the desired port. If
Fast Leave is enabled for a port, the switch will immediately
remove this port from the multicast group upon receiving IGMP
leave messages.
Member ports are ports connected to multicast group
members on the switch. A port is considered to be a member
port when it is added to a multicast group. The member port
ages if the switch does not receive IGMP membership report
message from the member port within the member port time.
The switch will no longer consider this port as a member port
and delete it from the multicast forwarding table. The valid
values are from 60 to 600 seconds.
Router ports are ports connected to Layer 3 devices on the
switch. The router port ages if the switch does not receive
134
port for IGMP Snooping feature