Storm Control - TP-Link T3700G-52TQ User Manual
Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
Entry Description:
UNIT:1/LAGS:
Select:
Port:
Egress Rate:
LAG:
Note:
When egress rate limit feature is enabled for one or more ports, you are suggested to disable
the flow control on each port to ensure the switch works normally.
12.3.2 Storm Control
Storm Control function allows the switch to filter broadcast, multicast and UL frame in the
network. If the transmission rate of the three kind packets exceeds the set bandwidth, the
packets will be automatically discarded to avoid network broadcast storm.
Choose the menu QoS→Bandwidth Control→Storm Control to load the following page.
Configuration Procedure:
1)
Select the port(s) and configure the upper rate limit for forwarding broadcast packets,
multicast packets and UL frames.
2)
Click Apply.
Click 1 to configure the physical ports. Click LAGS to configure
the link aggregation groups.
Select the desired port
multi-optional.
Displays the port number of the switch.
Configure the bandwidth for sending packets on the port.
Displays the LAG number which the port belongs to.
Figure 12-11 Storm Control
314
for Rate configuration. It is
Advertisement
Table of Contents
