Interval:
Max Buckets
Owner:
Operation:
15.3.2 Event
On this page, you can configure the RMON events.
Choose the menu SNMP → RMON → Event to load the following page.
Configuration Procedure:
Configure the event group for RMON. Click "Create".
Entry Description:
Index:
Community:
Description:
Type:
Specify the interval to take samplings from the port, ranging
from 10 to 3600 seconds. The default is 1800 seconds.
Displays the maximum number of buckets desired for the RMON
history group of statistics, ranging from 1 to 65535. The default
is 50 buckets.
Enter the name of the device or user that defines the entry.
Click "Edit" to edit the history group entry.
Figure15-11 Event Config
Displays the index number of the entry.
Enter the name of the user or the community to which the
event belongs.
Give a description to the event for identification.
Select the event type, which determines the act way of the
network device in response to an event.
None: No processing.
•
Log: Logging the event.
•
Notify: Sending trap messages to the management
•
station.
Log&Notify: Logging the event and sending trap
•
messages to the management station.
382