Bandwidth Control; Rate Limit - TP-Link T3700G-52TQ User Manual
Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
State:
Policy:
12.3 Bandwidth Control
Bandwidth function, allowing you to control the traffic rate and broadcast flow on each port to
ensure network in working order, can be implemented on Rate Limit and Storm Control pages.
12.3.1 Rate Limit
Rate limit functions to control the egress traffic rate on each port via configuring the available
bandwidth of each port. In this way, the network bandwidth can be reasonably distributed and
utilized.
Choose the menu QoS→Bandwidth Control→Rate Limit to load the following page.
Configuration Procedure:
1)
Configure the upper rate limit for the port to send packets.
2)
Click Apply.
The status of the policy on the interface. A policy is Up if
DiffServ
is
globally
administratively enabled and has a link. Otherwise, the status is
Down.
The DiffServ policy associated with the interface.
Figure 12-10 Rate Limit
313
enabled,
and
if
the
interface
is
Advertisement
Table of Contents
