TP-Link T3700G-52TQ User Manual page 149

Fast Leave:
Report
Suppression:
Member Port Time:
Router Port Time:
Max Response
Time:
Router Ports:
UNIT:
VLAN Table

Select:
VLAN ID:
Fast Leave:
Report
Suppression:
Member Port Time:
Router Port Time:
Max Response
Time:
Static Router Ports:
Dynamic Router
Ports:
Enable or disable Fast Leave feature in this VLAN. If Fast Leave
is enabled, the switch will immediately remove this port from
the multicast group upon receiving IGMP leave messages.
If this function is enabled, the switch will only forward the first
IGMP report message to Layer 3 devices and suppress
subsequent IGMP report messages from the same multicast
group during one query interval, which reduces the number of
IGMP packets.
Specify the aging time of the member port. Within this time, if
the switch doesn't receive IGMP report message from the
member port, it will consider this port is not a member port any
more.
Specify the aging time of the router port. Within this time, if the
switch doesn't receive IGMP query message from the router
port, it will consider this port is not a router port any more.
Enter the host's maximum response time to general query
messages in a range of 1 to 25 seconds.
Enter the static router port which is mainly used in the network
with stable topology.
Select the unit ID of the desired member in the stack.
Select the desired VLAN ID for configuration. It is multi-optional.
Displays the VLAN ID.
Displays the fast leave feature of the VLAN.
Displays the report suppression feature of the VLAN.
Displays the member port time of the VLAN.
Displays the router port time of the VLAN.
Displays the max response time of the VLAN.
Displays the static router ports of the VLAN.
Displays the dynamic router ports of the VLAN.
136